Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: LEDaccessoriesDescription: MOLEX 180289-0000 LEDHeat sink, pre drilled, black anodized, Bridgelux LED Light Engines, aluminum, 40mm, 80mm92831+$233.153310+$227.071050+$222.4080100+$220.7860200+$219.5696500+$217.94771000+$216.93392000+$215.9202 -
![]()
Category: LEDaccessoriesDescription: connector89635+$33.473750+$32.0432200+$31.2421500+$31.04191000+$30.84162500+$30.61275000+$30.46977500+$30.3266 -
![]()
Category: Light source and emitterDescription: MOLEX 180081-4220 Downlight, LED, 17.2W, 12.3VDC, White, 4100K, 80mm52631+$212.475210+$206.932350+$202.6828100+$201.2047200+$200.0962500+$198.61811000+$197.69432000+$196.7705 -
![]()
Category: LEDaccessoriesDescription: LED Lighting Lenses RS LED LENS COVER24615+$5.828025+$5.396350+$5.0941100+$4.9646500+$4.87822500+$4.77035000+$4.727110000+$4.6624 -
![]()
Category: High brightness LEDDescription: LEDLighting module HELIEON 80MM MODL 1200LM 4100K 32DEG42411+$193.387510+$188.342650+$184.4748100+$183.1295200+$182.1205500+$180.77521000+$179.93442000+$179.0936 -
![]()
Category: Light source and emitterDescription: MOLEX 180081-2230 Downlight, LED, 17.2W, 12.3VDC, Warm White, 3000K, 80mm19991+$173.044010+$168.529850+$165.0689100+$163.8651200+$162.9623500+$161.75851000+$161.00612000+$160.2537 -
![]()
Category: LEDaccessoriesDescription: Molex Citizen CLL LED The array mount for Citizen CLL CoB's Molex LED array mount is particularly suitable for OEM lighting manufacturers, simplifying the LED installation process and reducing installation time. By using solderless compression contacts, there is no need for manual or surface mount welding and expensive surface mount equipment. These LED array supports allow for quick installation of CoB LED arrays into fixtures, which can be replaced on-site using easy to loosen wire clamps, facilitating upgrades to existing applications. The Molex Citizen CLL CoB LED array mount is particularly suitable for applications including building lighting, area lighting, and recessed lighting. The compression contact to the power array is a gold-plated wire clamp terminal block for connecting the power supply. It is suitable for wire specifications of 18AWG or 20AWG and can be loosened with wire clamps for rework or replacement. It can be repaired on site and used to install the accessories and supports of the LED array to the holes of the heat sink through screws. M3 or 4-40 screws can be used to provide voltage isolation between the LED and the heat sink. Stable connection in high ambient temperatures is particularly suitable for lamp and small fixture applications, including MR16 or walkway lighting. Note that the following inventory numbers are single piece designs with double ended wire clamp terminal blocks: for CLL010 771-9442 for CLL020 775-0702 for CLL030 775-0705 for CLL040 775-0709 # # Molex Array Stand, used for LED modules330610+$7.7748100+$7.3861500+$7.12691000+$7.11392000+$7.06215000+$6.99737500+$6.945510000+$6.9196 -
![]()
Category: LEDaccessoriesDescription: MOLEX 180720-0001 LED lamp holder, female, 23.85MM-23.85MM626910+$10.7976100+$10.2577500+$9.89781000+$9.87982000+$9.80785000+$9.71787500+$9.645910000+$9.6099 -
![]()
Category: LEDaccessoriesDescription: LED Lighting Mounting Accessories COB LED HLDR ASSY 13.5X13.5 W/PRE HOLD7339 -
![]()
Category: LEDaccessoriesDescription: Molex Sharp Zenigata LED Array Holders The Molex LED Array Holders for Sharp Zenigata CoB"s are ideal for OEM light-fixture manufacturers by simplifying the LED installation process and reduce installation time through the use of solderless compression contacts that eliminate the need for hand or SMT soldering and expensive SMT equipment. These LED Array Holders allow: CoB LED arrays to be quickly installed into fixtures, enable field replacements by use of releasable wire-traps and facilitate upgrades to current applications. Molex Sharp Zenigata CoB LED Array Holders are ideal for applications including: Architectural lighting, Area lighting and Down lighting. Compression contacts to power array Gold plated Double-ended wire-trap terminal to attach power source, suitable for wire size 18AWG or 20AWG Releasable wire trap for rework or replacement for field serviceability Screw-mount attachment of LED array and holder to heat sink using M3 or 4-40 screws Provides voltage isolation between LED and heat sink Stable connection in high-ambient temperature Ideal for lamp and small-fixture applications, including MR16 or track lighting ### note Stock number 771-9451 is supplied with a Cover which has Zhaga compliant optical interface. ### Molex Array holder, used for LED modules819910+$8.3340100+$7.9173500+$7.63951000+$7.62562000+$7.57015000+$7.50067500+$7.445010000+$7.4173 -
![]()
Category: LEDaccessoriesDescription: LEDThe array lamp sockets are made of West Rail CLL020 and CLL030, with gold (Au) coating - two-piece design LED Array Holder for Citizen CLL020 and CLL030, Gold (Au) Plating - Two Piece Design95875+$5.601225+$5.186350+$4.8958100+$4.7714500+$4.68842500+$4.58465000+$4.543210000+$4.4809 -
![]()
Category: LEDaccessoriesDescription: CXA20 LED ARRAY HOLDER W/COVER78925+$31.533850+$30.1862200+$29.4316500+$29.24291000+$29.05432500+$28.83865000+$28.70397500+$28.5691 -
![]()
Category: LEDaccessoriesDescription: LED ARRAY HOLDER W/O COVER23925+$31.533850+$30.1862200+$29.4316500+$29.24291000+$29.05432500+$28.83865000+$28.70397500+$28.5691 -
![]()
Category: LEDaccessoriesDescription: SlimRay LED Array Holder for 13.35 by 13.35mm COB, Pre-Wired, Circular, Yellow and White Wires825910+$10.3860100+$9.8667500+$9.52051000+$9.50322000+$9.43405000+$9.34747500+$9.278210000+$9.2435 -
![]()
Category: LEDDescription: LED ARRAY HOLDER FOR CREE XLAMP CXA2520, CXA2530 AND CXA2540 LED ARRAY,854410+$11.2920100+$10.7274500+$10.35101000+$10.33222000+$10.25695000+$10.16287500+$10.087510000+$10.0499 -
![]()
Category: LEDaccessoriesDescription: Molex LED Molex's LED array sockets are particularly suitable for OEM lighting manufacturers as they simplify the Cree LED installation process and reduce installation time by using compression contacts, eliminating the need for manual or surface mount soldering and expensive surface mount equipment. Molex's LED array mount utilizes unparalleled interconnect technology to provide a solderless solution for installing Cree LED arrays into OEM designs. These supports allow the Cree LED array to be quickly installed into fixtures and can be replaced on-site, facilitating upgrades to existing applications. Molex LED array holders are highly suitable for applications such as building lighting, area lighting, and recessed lighting. The compression contact of the power array can loosen the wire clamp for easy rework or replacement. It is recommended to use solid wires or pre tinned stranded wires to connect the LED array and bracket to the heat sink with screws. M3 or 4-40 screws can be used to provide voltage isolation between the LED and the heat sink, and stable connection in high ambient temperatures to provide dust and impact protection; Provides flexible design options particularly suitable for lamp and small fixture applications, including MR16 or trail lighting that can be repaired on-site. Stock numbers 743-5872 and 743-5876 have double ended wire clamp terminals, parallel wiring, and wire specifications of 18 AWG or 20 AWG. Inventory numbers 743-5885 and 743-5888 have double ended wire clamp terminals, serial wiring, and wire specifications of 18 AWG or 20 AWG. Inventory numbers 743-5882, 743-5891, and 774-8605 have double ended wire clamp terminals with wire specifications of 18 AWG or 20 AWG. Inventory number 797-5939 single ended wire clamp terminal block, with wire specifications ranging from 18 AWG to 22 AWG. Inventory number 797-5932 double ended wire clamp terminal block, with wire specifications ranging from 18 AWG to 22 AWG. Molex array holder, used for LED modules809810+$10.3860100+$9.8667500+$9.52051000+$9.50322000+$9.43405000+$9.34747500+$9.278210000+$9.2435 -
![]()
Category: LEDaccessoriesDescription: LED Holder For LED Arrays69435+$12.232450+$11.7096200+$11.4169500+$11.34371000+$11.27052500+$11.18695000+$11.13467500+$11.0823 -
![]()
Category: LEDaccessoriesDescription: Molex SlimRay™ Pre wired LED array holder for Lumileds LUXION SlimRay ™ Pre wired LED array holder with thin step design, suitable for use with Lumileds LUXION and similar next-generation COB arrays. These SlimRays ™ The LED array holder has pre wired high-voltage gold-plated crimping terminals that do not require manual soldering and eliminate damage to the COB during processing. The sturdy reflective white thermoplastic connector housing is used to improve light output. These SlimRays ™ The additional features of the LED array holder include LED onboard chip (COB) pre fixing function (allowing the LED array to be mounted onto the holder during final assembly), flat top surface (with integrated angled edges, surrounding LES, providing a base for optical lenses and assisting in light output), and simple screw mounting accessories (used to secure to heat sinks). These SlimRays ™ Typical applications of pre wired Lumileds LUXION LED array sockets include general lighting, such as spotlight, spotlight, and area lighting, such as roads and parking lots. Molex array sockets are used for LED modules98095+$17.244650+$16.5077200+$16.0950500+$15.99181000+$15.88862500+$15.77075000+$15.69707500+$15.6233 -
![]()
Category: LEDaccessoriesDescription: Molex SlimRay™ Pre wired LED array holder for Lumileds LUXION SlimRay ™ Pre wired LED array holder with thin step design, suitable for use with Lumileds LUXION and similar next-generation COB arrays. These SlimRays ™ The LED array holder has pre wired high-voltage gold-plated crimping terminals that do not require manual soldering and eliminate damage to the COB during processing. The sturdy reflective white thermoplastic connector housing is used to improve light output. These SlimRays ™ The additional features of the LED array holder include LED onboard chip (COB) pre fixing function (allowing the LED array to be mounted onto the holder during final assembly), flat top surface (with integrated angled edges, surrounding LES, providing a base for optical lenses and assisting in light output), and simple screw mounting accessories (used to secure to heat sinks). These SlimRays ™ Typical applications of pre wired Lumileds LUXION LED array sockets include general lighting, such as spotlight, spotlight, and area lighting, such as roads and parking lots. Molex array sockets are used for LED modules33085+$24.719850+$23.6634200+$23.0718500+$22.92391000+$22.77602500+$22.60705000+$22.50137500+$22.3957 -
![]()
Category: LEDaccessoriesDescription: Molex Citizen CLL LED The array mount for Citizen CLL CoB's Molex LED array mount is particularly suitable for OEM lighting manufacturers, simplifying the LED installation process and reducing installation time. By using solderless compression contacts, there is no need for manual or surface mount welding and expensive surface mount equipment. These LED array supports allow for quick installation of CoB LED arrays into fixtures, which can be replaced on-site using easy to loosen wire clamps, facilitating upgrades to existing applications. The Molex Citizen CLL CoB LED array mount is particularly suitable for applications including building lighting, area lighting, and recessed lighting. The compression contact to the power array is a gold-plated wire clamp terminal block for connecting the power supply. It is suitable for wire specifications of 18AWG or 20AWG and can be loosened with wire clamps for rework or replacement. It can be repaired on site and used to install the accessories and supports of the LED array to the holes of the heat sink through screws. M3 or 4-40 screws can be used to provide voltage isolation between the LED and the heat sink. Stable connection in high ambient temperatures is particularly suitable for lamp and small fixture applications, including MR16 or walkway lighting. Note that the following inventory numbers are single piece designs with double ended wire clamp terminal blocks: for CLL010 771-9442 for CLL020 775-0702 for CLL030 775-0705 for CLL040 775-0709 # # Molex Array Stand, used for LED modules203010+$11.2392100+$10.6772500+$10.30261000+$10.28392000+$10.20895000+$10.11537500+$10.040410000+$10.0029 -
![]()
Category: High brightness LEDDescription: 80MM 1200 LUMEN 4100K 50DEG41921+$94.234510+$90.1373100+$89.3998250+$88.8262500+$87.92481000+$87.51512500+$86.94155000+$86.4499 -
![]()
Category: LEDaccessoriesDescription: Molex LED Molex's LED array sockets are particularly suitable for OEM lighting manufacturers as they simplify the Cree LED installation process and reduce installation time by using compression contacts, eliminating the need for manual or surface mount soldering and expensive surface mount equipment. Molex's LED array mount utilizes unparalleled interconnect technology to provide a solderless solution for installing Cree LED arrays into OEM designs. These supports allow the Cree LED array to be quickly installed into fixtures and can be replaced on-site, facilitating upgrades to existing applications. Molex LED array holders are highly suitable for applications such as building lighting, area lighting, and recessed lighting. The compression contact of the power array can loosen the wire clamp for easy rework or replacement. It is recommended to use solid wires or pre tinned stranded wires to connect the LED array and bracket to the heat sink with screws. M3 or 4-40 screws can be used to provide voltage isolation between the LED and the heat sink, and stable connection in high ambient temperatures to provide dust and impact protection; Provides flexible design options particularly suitable for lamp and small fixture applications, including MR16 or trail lighting that can be repaired on-site. Stock numbers 743-5872 and 743-5876 have double ended wire clamp terminals, parallel wiring, and wire specifications of 18 AWG or 20 AWG. Inventory numbers 743-5885 and 743-5888 have double ended wire clamp terminals, serial wiring, and wire specifications of 18 AWG or 20 AWG. Inventory numbers 743-5882, 743-5891, and 774-8605 have double ended wire clamp terminals with wire specifications of 18 AWG or 20 AWG. Inventory number 797-5939 single ended wire clamp terminal block, with wire specifications ranging from 18 AWG to 22 AWG. Inventory number 797-5932 double ended wire clamp terminal block, with wire specifications ranging from 18 AWG to 22 AWG. ###Molex array holder, used for LED modules84925+$22.171550+$21.2240200+$20.6934500+$20.56081000+$20.42812500+$20.27655000+$20.18187500+$20.0870 -
![]()
Category: LEDaccessoriesDescription: CXA20 LED ARRAY HOLDER W/O COVER58705+$14.764250+$14.1333200+$13.7799500+$13.69161000+$13.60332500+$13.50235000+$13.43927500+$13.3761 -
![]()
Category: High brightness LEDDescription: 80MM 800 LUMEN 3000K 50DEG29841+$133.595510+$130.110450+$127.4385100+$126.5091200+$125.8121500+$124.88281000+$124.30192000+$123.7211 -
![]()
Category: LEDaccessoriesDescription: LEDArray Holders for Bridgelux ES and RS Arrays81421+$39.152210+$36.9058100+$35.2370250+$34.9803500+$34.72351000+$34.43472500+$34.17805000+$34.0175 -
![]()
Category: LEDaccessoriesDescription: LED ARRAY HOLDER W/LENS COVER80395+$26.903050+$25.7533200+$25.1094500+$24.94851000+$24.78752500+$24.60365000+$24.48867500+$24.3736 -
![]()
Category: LEDaccessoriesDescription: LED Array Holder For CREE XLamp Plus MP-L Array, With Lens Cover, Parallel Circuits77835+$21.356050+$20.4434200+$19.9323500+$19.80451000+$19.67672500+$19.53075000+$19.43947500+$19.3482 -
![]()
Category: LEDaccessoriesDescription: LEDThe array lamp holder is Cree's XLamp * MP-L array, which does not require a lens cover and has a parallel circuit LED Array Holder for Cree* XLamp MP-L Array, without Lens Cover, Parallel Circuits151710+$11.2044100+$10.6442500+$10.27071000+$10.25202000+$10.17735000+$10.08407500+$10.009310000+$9.9719 -
![]()
Category: LEDaccessoriesDescription: LED Array Holder For CREE XLamp Plus MP-L Array, Without Lens Cover, Parallel Circuits488710+$10.7688100+$10.2304500+$9.87141000+$9.85352000+$9.78175000+$9.69197500+$9.620110000+$9.5842 -
![]()
Category: High brightness LEDDescription: 80MM 1200 LUMEN 4100K 32DEG57151+$292.064410+$284.445350+$278.6040100+$276.5722200+$275.0484500+$273.01671000+$271.74682000+$270.4770
